Rendezvous Technique for the Treatment of Complete Common Bile Duct Transection After Multiple Hepatobiliary Surgeries

Common bile duct (CBD) injury during surgical procedures is a serious complication. Partial injury can usually be managed by a combination of percutaneous and/or endoscopic techniques. However, the management of complete transection of the CBD is very challenging. There are small case series of nonsurgical management of complete CBD transection during laparoscopic cholecystectomy. In this particular case, a 55-year-old female patient had multiple operations because of malignant pheochromocytoma with liver metastases. She developed a complete CBD transection during right hepatectomy. A biloma was managed with image-guided percutaneous drainage. However, both attempts of percutaneous transhepatic cholangiography (PTC) and endoscopic retrograde cholangiopancreatography (ERCP) for CBD stent were unsuccessful, as the native CBD was partially resected during the injury. A rendezvous procedure, in which a guidewire was placed through the distal CBD and into a biloma by ERCP and subsequently snared with PTC, allowed for a biliary-duodenal catheter to be placed successfully and achieve continuity of the patient's biliary tree.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/140151/1/lap.2014.0374.pd

Relationship between single and bulk mechanical properties for zeolite ZSM5 spray-dried particles

In this work typical mechanical properties for a catalyst support material, ZSM5 (a spray-dried granular zeolite), have been measured in order to relate the bulk behaviour of the powder material to the single particle mechanical properties. Particle shape and size distribution of the powders, determined by laser diffraction and scanning electron microscopy (SEM), confirmed the spherical shape of the spray-dried particles. The excellent flowability of the material was assessed by typical methods such as the Hausner ratio and the Carr index. This was confirmed by bulk measurements of the particle–particle internal friction parameter and flow function using a Schulze shear cell, which also illustrated the low compressibility of the material. Single particle compression was used to characterize single particle mechanical proper-ties such as reduced elastic modulus and strength from Hertz contact mechanics theory. Comparison with surface properties obtained from nanoindentation suggests heterogeneity, the surface being harder than the core. In order to evaluate the relationship between single particle mechanical properties and bulk compression behaviour, uniaxial confined compression was carried out. It was determined that the Adams model was suitable for describing the bulk compression and furthermore that the Adams model parameter, apparent strength of single particles, was in good agreement with the single particle strength determined from single particle compression test

Mindfulness based interventions in multiple sclerosis: a systematic review

<b>Background</b> Multiple sclerosis (MS) is a stressful condition; depression, anxiety, pain and fatigue are all common problems. Mindfulness based interventions (MBIs) mitigate stress and prevent relapse in depression and are increasingly being used in healthcare. However, there are currently no systematic reviews of MBIs in people with MS. This review aims to evaluate the effectiveness of MBIs in people with MS.<p></p> <b>Methods</b> Systematic searches were carried out in seven major databases, using both subject headings and key words. Papers were screened, data extracted, quality appraised, and analysed by two reviewers independently, using predefined criteria. Study quality was assessed using the Cochrane Collaboration risk of bias tool. Perceived stress was the primary outcome. Secondary outcomes include mental health, physical health, quality of life, and health service utilisation. Statistical meta-analysis was not possible. Disagreements were adjudicated by a third party reviewer.<p></p> <b>Results</b> Three studies (n = 183 participants) were included in the final analysis. The studies were undertaken in Wales (n = 16, randomised controlled trial - (RCT)), Switzerland (n = 150, RCT), and the United States (n = 17, controlled trial). 146 (80%) participants were female; mean age (SD) was 48.6 (9.4) years. Relapsing remitting MS was the main diagnostic category (n = 123, 67%); 43 (26%) had secondary progressive disease; and the remainder were unspecified. MBIs lasted 6–8 weeks; attrition rates were variable (5-43%); all employed pre- post- measures; two had longer follow up; one at 3, and one at 6 months. Socio-economic status of participants was not made explicit; health service utilisation and costs were not reported. No study reported on perceived stress. All studies reported quality of life (QOL), mental health (anxiety and depression), physical (fatigue, standing balance, pain), and psychosocial measures. Statistically significant beneficial effects relating to QOL, mental health, and selected physical health measures were sustained at 3- and 6- month follow up.<p></p> <b>Conclusion</b> From the limited data available, MBIs may benefit some MS patients in terms of QOL, mental health, and some physical health measures. Further studies are needed to clarify how MBIs might best serve the MS population.<p></p&gt

Organisational and student characteristics, fidelity, funding models, and unit costs of recovery colleges in 28 countries: a cross-sectional survey

Background: Recovery colleges were developed in England to support the recovery of individuals who have mental health symptoms or mental illness. They have been founded in many countries but there has been little international research on recovery colleges and no studies investigating their staffing, fidelity, or costs. We aimed to characterise recovery colleges internationally, to understand organisational and student characteristics, fidelity, and budget. // Methods: In this cross-sectional study, we identified all countries in which recovery colleges exist. We repeated a cross-sectional survey done in England for recovery colleges in 28 countries. In both surveys, recovery colleges were defined as services that supported personal recovery, that were coproduced with students and staff, and where students learned collaboratively with trainers. Recovery college managers completed the survey. The survey included questions about organisational and student characteristics, fidelity to the RECOLLECT Fidelity Measure, funding models, and unit costs. Recovery colleges were grouped by country and continent and presented descriptively. We used regression models to explore continental differences in fidelity, using England as the reference group. // Findings: We identified 221 recovery colleges operating across 28 countries, in five continents. Overall, 174 (79%) of 221 recovery colleges participated. Most recovery colleges scored highly on fidelity. Overall scores for fidelity (β=–2·88, 95% CI 4·44 to –1·32; p=0·0001), coproduction (odds ratio [OR] 0·10, 95% CI 0·03 to 0·33; p<0·0001), and being tailored to the student (OR 0·10, 0·02 to 0·39; p=0·0010), were lower for recovery colleges in Asia than in England. No other significant differences were identified between recovery colleges in England, and those in other continents where recovery colleges were present. 133 recovery colleges provided data on annual budgets, which ranged from €0 to €2 550 000, varying extensively within and between continents. From included data, all annual budgets reported by the college added up to €30 million, providing 19 864 courses for 55 161 students. // Interpretation: Recovery colleges exist in many countries. There is an international consensus on key operating principles, especially equality and a commitment to recovery, and most recovery colleges achieve moderate to high fidelity to the original model, irrespective of the income band of their country. Cultural differences need to be considered in assessing coproduction and approaches to individualising support. // Funding: National Institute for Health and Care Research

A holistic multi evidence approach to study the fragmentation behaviour of crystalline mannitol

Mannitol is an essential excipient employed in orally disintegrating tablets due to its high palatability. However its fundamental disadvantage is its fragmentation during direct compression, producing mechanically weak tablets. The primary aim of this study was to assess the fracture behaviour of crystalline mannitol in relation to the energy input during direct compression, utilising ball milling as the method of energy input, whilst assessing tablet characteristics of post-milled powders. Results indicated that crystalline mannitol fractured at the hydrophilic (011) plane, as observed through SEM, alongside a reduction in dispersive surface energy. Disintegration times of post-milled tablets were reduced due to the exposure of the hydrophilic plane, whilst more robust tablets were produced. This was shown through higher tablet hardness and increased plastic deformation profiles of the post-milled powders, as observed with a lower yield pressure through an out-of-die Heckel analysis. Evaluation of crystal state using x-ray diffraction/differential scanning calorimetry showed that mannitol predominantly retained the β-polymorph; however x-ray diffraction provided a novel method to calculate energy input into the powders during ball milling. It can be concluded that particle size reduction is a pragmatic strategy to overcome the current limitation of mannitol fragmentation and provide improvements in tablet properties

Detection of small RNAs in Bordetella pertussis and identification of a novel repeated genetic element

Background: Small bacterial RNAs (sRNAs) have been shown to participate in the regulation of gene expression and have been identified in numerous prokaryotic species. Some of them are involved in the regulation of virulence in pathogenic bacteria. So far, little is known about sRNAs in Bordetella, and only very few sRNAs have been identified in the genome of Bordetella pertussis, the causative agent of whooping cough. Results: An in silico approach was used to predict sRNAs genes in intergenic regions of the B. pertussis genome. The genome sequences of B. pertussis, Bordetella parapertussis, Bordetella bronchiseptica and Bordetella avium were compared using a Blast, and significant hits were analyzed using RNAz. Twenty-three candidate regions were obtained, including regions encoding the already documented 6S RNA, and the GCVT and FMN riboswitches. The existence of sRNAs was verified by Northern blot analyses, and transcripts were detected for 13 out of the 20 additional candidates. These new sRNAs were named Bordetella pertussis RNAs, bpr. The expression of 4 of them differed between the early, exponential and late growth phases, and one of them, bprJ2, was found to be under the control of BvgA/BvgS two-component regulatory system of Bordetella virulence. A phylogenetic study of the bprJ sequence revealed a novel, so far undocumented repeat of ~90 bp, found in numerous copies in the Bordetella genomes and in that of other Betaproteobacteria. This repeat exhibits certain features of mobil

Organisational and student characteristics, fidelity, funding models, and unit costs of recovery colleges in 28 countries:a cross-sectional survey

Background: Recovery colleges were developed in England to support the recovery of individuals who have mental health symptoms or mental illness. They have been founded in many countries but there has been little international research on recovery colleges and no studies investigating their staffing, fidelity, or costs. We aimed to characterise recovery colleges internationally, to understand organisational and student characteristics, fidelity, and budget. Methods: In this cross-sectional study, we identified all countries in which recovery colleges exist. We repeated a cross-sectional survey done in England for recovery colleges in 28 countries. In both surveys, recovery colleges were defined as services that supported personal recovery, that were coproduced with students and staff, and where students learned collaboratively with trainers. Recovery college managers completed the survey. The survey included questions about organisational and student characteristics, fidelity to the RECOLLECT Fidelity Measure, funding models, and unit costs. Recovery colleges were grouped by country and continent and presented descriptively. We used regression models to explore continental differences in fidelity, using England as the reference group. Findings: We identified 221 recovery colleges operating across 28 countries, in five continents. Overall, 174 (79%) of 221 recovery colleges participated. Most recovery colleges scored highly on fidelity. Overall scores for fidelity (β=–2·88, 95% CI 4·44 to –1·32; p=0·0001), coproduction (odds ratio [OR] 0·10, 95% CI 0·03 to 0·33; p&lt;0·0001), and being tailored to the student (OR 0·10, 0·02 to 0·39; p=0·0010), were lower for recovery colleges in Asia than in England. No other significant differences were identified between recovery colleges in England, and those in other continents where recovery colleges were present. 133 recovery colleges provided data on annual budgets, which ranged from €0 to €2 550 000, varying extensively within and between continents. From included data, all annual budgets reported by the college added up to €30 million, providing 19 864 courses for 55 161 students. Interpretation: Recovery colleges exist in many countries. There is an international consensus on key operating principles, especially equality and a commitment to recovery, and most recovery colleges achieve moderate to high fidelity to the original model, irrespective of the income band of their country. Cultural differences need to be considered in assessing coproduction and approaches to individualising support. Funding: National Institute for Health and Care Research.</p

Organisational and student characteristics, fidelity, funding models, and unit costs of recovery colleges in 28 countries: a cross-sectional survey.

BACKGROUND: Recovery colleges were developed in England to support the recovery of individuals who have mental health symptoms or mental illness. They have been founded in many countries but there has been little international research on recovery colleges and no studies investigating their staffing, fidelity, or costs. We aimed to characterise recovery colleges internationally, to understand organisational and student characteristics, fidelity, and budget. METHODS: In this cross-sectional study, we identified all countries in which recovery colleges exist. We repeated a cross-sectional survey done in England for recovery colleges in 28 countries. In both surveys, recovery colleges were defined as services that supported personal recovery, that were coproduced with students and staff, and where students learned collaboratively with trainers. Recovery college managers completed the survey. The survey included questions about organisational and student characteristics, fidelity to the RECOLLECT Fidelity Measure, funding models, and unit costs. Recovery colleges were grouped by country and continent and presented descriptively. We used regression models to explore continental differences in fidelity, using England as the reference group. FINDINGS: We identified 221 recovery colleges operating across 28 countries, in five continents. Overall, 174 (79%) of 221 recovery colleges participated. Most recovery colleges scored highly on fidelity. Overall scores for fidelity (β=-2·88, 95% CI 4·44 to -1·32; p=0·0001), coproduction (odds ratio [OR] 0·10, 95% CI 0·03 to 0·33; p<0·0001), and being tailored to the student (OR 0·10, 0·02 to 0·39; p=0·0010), were lower for recovery colleges in Asia than in England. No other significant differences were identified between recovery colleges in England, and those in other continents where recovery colleges were present. 133 recovery colleges provided data on annual budgets, which ranged from €0 to €2 550 000, varying extensively within and between continents. From included data, all annual budgets reported by the college added up to €30 million, providing 19 864 courses for 55 161 students. INTERPRETATION: Recovery colleges exist in many countries. There is an international consensus on key operating principles, especially equality and a commitment to recovery, and most recovery colleges achieve moderate to high fidelity to the original model, irrespective of the income band of their country. Cultural differences need to be considered in assessing coproduction and approaches to individualising support. FUNDING: National Institute for Health and Care Research

Combustion 2000

This report is a presentation of work carried out on Phase II of the HIPPS program under DOE contract DE-AC22-95PC95144 from June 1995 to March 2001. The objective of this report is to emphasize the results and achievements of the program and not to archive every detail of the past six years of effort. These details are already available in the twenty-two quarterly reports previously submitted to DOE and in the final report from Phase I. The report is divided into three major foci, indicative of the three operational groupings of the program as it evolved, was restructured, or overtaken by events. In each of these areas, the results exceeded DOE goals and expectations. HIPPS Systems and Cycles (including thermodynamic cycles, power cycle alternatives, baseline plant costs and new opportunities) HITAF Components and Designs (including design of heat exchangers, materials, ash management and combustor design) Testing Program for Radiative and Convective Air Heaters (including the design and construction of the test furnace and the results of the tests) There are several topics that were part of the original program but whose importance was diminished when the contract was significantly modified. The elimination of the subsystem testing and the Phase III demonstration lessened the relevance of subtasks related to these efforts. For example, the cross flow mixing study, the CFD modeling of the convective air heater and the power island analysis are important to a commercial plant design but not to the R&amp;D product contained in this report. These topics are of course, discussed in the quarterly reports under this contract. The DOE goal for the High Performance Power Plant System ( HIPPS ) is high thermodynamic efficiency and significantly reduced emissions. Specifically, the goal is a 300 MWe plant with &gt; 47% (HHV) overall efficiency and {le} 0.1 NSPS emissions. This plant must fire at least 65% coal with the balance being made up by a premium fuel such as natural gas. To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization issues of fabrication and reliability, availability and maintenance. The program that has sought to develop and implement these HIPPS designs is outlined below